Repair Procedures: Replacement: Rear
- Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.
- Remove the front wheel and tire (A) from the rear hub.
Tightening Torque:
107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
NOTE: Be careful not to damage the hub bolts when removing the rear wheel and tire. - Remove the trunk luggage side trim [RH].
(Refer to Body - "TRUNK TRIM ")
- Loosen the bolt and then remove the G-Sensor.
Tightening Torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)