LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2020 >> G80 3.8, RWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Wheel >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
  2. Turn the steering wheel so that the front wheels are placed in the straight ahead position.
  3. Remove the Airbag Module.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  4. Disconnect the connector & lock bolt (A) and then remove the steering wheel by using special service tool (09561-11001).
    G12666307Courtesy of HYUNDAI MOTOR AMERICA
    G12666308Courtesy of HYUNDAI MOTOR AMERICA

    Information 

    Tighten the lock bolt appropriately and install the SST (09561-1101) in order to separate the steering wheel easily.

    NOTE: Do not use a hammer to remove the steering wheel, it may damage the steering column.
  5. Install in the reverse order of removal.
    NOTE: When installing, do not reuse the steering lock bolt.