LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2020 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column Module >> Steering Column Module >> Description And Operation >> Directional Switch >> Error Detection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Error Detection

  1. Error detection for tilt and telescope
    • SCM detects an error if the following conditions occur during reproduction, driver in/out operation, or operation by manual switch.
    • Error generation conditions
    • Tilt: Less than 4 pulses within 1 sec.
    • Telescope: Less than 4 pulses within 1 sec.
    • Error clear conditions
    • Tilt: Over 4 pulses within 1 sec.
    • Telescope: Over 4 pulses within 1 sec.
  2. Operation when an error is detected
    • Tilt & Telescope operation stops regardless if the operation was manual, reproduction or driver in/out operation.

      But position operations other than that of the motor with an error are performed normally.

    • When the manual switch is switched from OFF to ON, the motor moves to the position intended by the driver even if an error has occurred.
    • If reproduction or driver in/out operation conditions are satisfied, then all the motors move to the target positions. But the motor with an error moves to the target position only after clearing the error.
scientia non olet · About LEMON Manuals