Repair Procedures: Inspection

Information 

Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.

1. Disconnect the parking switch connector.
2. Turn Ignition "ON", & engine "OFF".
3. Measure the each signal in "P" range or "not p" range.
   SIGNAL CODE SPECIFICATIONS
   
   

   Signal	P	Not P
   S1	10 - 38.4%	41.1 - 90%
   S2	90 - 61.6%	58.9 - 10%

   PIN CONNECTION DESCRIPTION
   
   

   Pin	Connection information
   1	Ground (Ps, Ns)
   2	Ps
   3	-
   4	Ns
   5	Power (5V)
   6	Ground (5V)
   7	S1
   8	S2