4WD Control System DTCS
WARNING: This page is about a different car, the 2022 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
4WD CONTROL SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC P1736 | 00: Motor Supply Voltage High Voltage |
| DTC P1737 | 00: Motor Supply Voltage Low Voltage |
| DTC P1756 | 00: EMC Internal Error |
| DTC P1780 | 00: Control Unit Supply High Voltage |
| DTC P1781 | 00: Control Unit Supply Low Voltage |
| DTC P3100 | 00: Control Module - Failure Motor winding |
| DTC P3101 | 00: Control Module - Motor Overcurrent |
| DTC P3102 | 00: Control Module - Control ASIC Over temperature |
| DTC P3103 | 00: Control Module - Failure Position Sensor |
| DTC P3104 | 00: Control Module - Failure Current Measurement |
| DTC P3105 | 00: Control Module - Failure External Watchdog disabled |
| DTC P3106 | 00: Control Module - Failure External Watchdog Test |
| DTC P3107 | 00: Motor Supply Voltage Open Circuit |
| DTC P3108 | 00: Control Unit Supply Voltage Open Circuit |
| DTC P3109 | 00: System Failure - Torque Tube Violation |
| DTC P310A | 00: System Failure - Initial Position Search Failed |
| DTC P310B | 00: System Failure - Initial Position Drift |
| DTC P310C | 00: System Failure - implausible Calibration Value |
| DTC P310D | 00: System Failure - Position Failure During Calibration |
| DTC P310E | 00: Mechanical Failure - Angle Limit Exceed |
| DTC P310F | 00: System Failure - Maximal Clutch Stress |
| DTC P3110 | 00: System Failure - Maximal ECU Stress |
| DTC P3111 | 00: Mechanical Failure - Clutch Worn |
| DTC P3112 | 00: Mechanical Failure - Oil Worn |
| DTC P3113 | 00: Initial Calibration Not Done |
| DTC P3114 | 00: Vehicle Information Option Not Detected Or Invalid |
| DTC P3115 | 00: HW Classification Missing |
| DTC P3116 | 00: Insufficient CAN Signals - Driving Stability |
| DTC P3117 | 00: Insufficient CAN Signals - TC Protection |
| DTC P3118 | 00: Insufficient CAN Signals - Driving Inconvenience Signals |
| DTC P3119 | 00: Insufficient CAN Signals - Driving Inconvenience Tires |
| DTC U0001 | 00: High Speed CAN Communication Bus |
| DTC U0100 | 00: Lost Communication With ECM/PCM 'A' |
| DTC U0101 | 00: Lost Communication With TCM |
| DTC U0121 | 00: Lost Communication With Anti-Lock Brake System (ABS) Control Module |
| DTC U0122 | 00: Lost Communication With Vehicle Dynamics Control Module (C-CAN) |
| DTC U0126 | 00: Lost Communication With Steering Angle Sensor Module |
| DTC U0146 | 00: Lost Communication With Gateway or Cluster |