LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System - 3.3L) >> Oil Pressure Sensor OPS >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the OPS connector.
  3. Remove the OPS.

    (Refer to "REMOVAL ")

  4. After immersing the thermistor of the sensor into engine coolant, measure resistance between the OPS terminals 1 and 2.
  5. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals