LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> GV80 2.5T Advanced, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 2.5L >> Fuel Pump Motor >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Remove the fuel pump.

    (Refer to Fuel Delivery System - "LOW PRESSURE FUEL PUMP ")

  2. Disconnect the fuel sender connector (A) and fuel pump connector (B).
    G14721503Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the fuel sender (B) after releasing the fixing hooks (A).
    G14721504Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the fuel feed tube quick-connector (B) after releasing the fixing clip (A).
  5. Remove the head assembly (D) after releasing the fixing clip (C).
    G14721505Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the reservoir cap (B) after releasing the fixing hooks (A).
    G14721506Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the ground cable (A).
  8. Disconnect the fuel pump motor connector (B).
    G14721507Courtesy of HYUNDAI MOTOR AMERICA
  9. Release the fixing hooks (A) and then remove fuel pressure regulator (B).
    G14721508Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the clamp (A) and remove the suction port (B).
    G14721509Courtesy of HYUNDAI MOTOR AMERICA
  11. Release the fixing hooks and then remove pre-filter (A).
    G14721510Courtesy of HYUNDAI MOTOR AMERICA
  12. Remove the fuel pump motor (A) in the direction of an arrow.
    G14721511Courtesy of HYUNDAI MOTOR AMERICA
    G14721512Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals