LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> GV80 3.5T Advanced >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 3.5L >> Fuel Pump Motor >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Remove the fuel pump.

    (Refer to Fuel Delivery System - "LOW PRESSURE FUEL PUMP ")

  2. Disconnect the fuel sender connector (A) and fuel pump connector (B).
    G14728808Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the fuel sender (B) after releasing the fixing hooks (A).
    G14728809Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the fuel feed tube quick-connector (B) after releasing the fixing clip (A).
  5. Remove the head assembly (D) after releasing the fixing clip (C).
    G14728810Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the reservoir cap (B) after releasing the fixing hooks (A).
    G14728811Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the ground cable (A).
  8. Disconnect the fuel pump motor connector (B).
    G14728812Courtesy of HYUNDAI MOTOR AMERICA
  9. Release the fixing hooks (A) and then remove fuel pressure regulator (B).
    G14728813Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the clamp (A) and remove the suction port (B).
    G14728814Courtesy of HYUNDAI MOTOR AMERICA
  11. Release the fixing hooks and then remove pre-filter (A).
    G14728815Courtesy of HYUNDAI MOTOR AMERICA
  12. Remove the fuel pump motor (A) in the direction of an arrow.
    G14728816Courtesy of HYUNDAI MOTOR AMERICA
    G14728817Courtesy of HYUNDAI MOTOR AMERICA