Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Switch "OFF" the ignition and disconnect the battery negative (-) terminal.
- Remove the Air Cleaner.
(Refer to Engine Mechanical System - "AIR CLEANER ")
- Disconnect the RCV control solenoid valve connector (A), RCV hoses (B).
- After installing bolt, remove the RCV control solenoid valve.
Tightening torque:
9.8 - 11.7 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.6 lb-ft)