Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Switch "OFF" the ignition and disconnect the battery negative (-) terminal.
- Disconnect the variable force solenoid connector (A).
 Courtesy of HYUNDAI MOTOR AMERICA
|
- Remove the installation bolt (B), and then remove the variable force solenoid (VFS).
Tightening torque:
9.8 - 11.7 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.6 lb-ft)
 Courtesy of HYUNDAI MOTOR AMERICA
|