LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2022 >> G70 3.3T Launch Edition, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal >> Bank 1/Sensor 1
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Bank 1/Sensor 1

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the connector (A), and then remove the sensor (B).
NOTE:
  • Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.
G15591462Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals