LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2023 >> G80 2.5T, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Trunk Module >> Power Trunk Module Drive Unit >> Repair Procedures >> Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the luggage side trim.

    (Refer to Body - "LUGGAGE SIDE TRIM ")

  3. Disconnect the motor connector.
  4. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.
    G15554757Courtesy of HYUNDAI MOTOR AMERICA
    Position Terminal 7 14
    Close Clockwise (+) (-)
    Open Counter-clockwise (-) (+)
scientia non olet · About LEMON Manuals