LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1990 >> Storm Base, Automatic, JF-403E >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Throttle Position Sensor (TPS) >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

With ignition off, unplug TPS harness connector, remove mounting screws and slide TPS off throttle shaft. To install, ensure TPS engages tang on throttle shaft and install mounting screws. Tighten screws to 18 INCH lbs. (2.0 N.m). TPS is self-zeroing and is non-adjustable.

scientia non olet · About LEMON Manuals