LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1992 >> Metro Base, 4D Hatchback, Standard >> Repair and Diagnosis >> Transmission >> Clutches >> Adjustments >> Clutch Start Switch >> Metro
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Clutch Start Switch: Metro

  1. Apply parking brake firmly. Place gearshift lever in Neutral. Disconnect clutch start switch electrical connector. Connect ohmmeter between switch terminals. Loosen lock nut and turn switch outward. Depress clutch pedal to floor.
  2. Return clutch pedal along its travel from floor and stop at specified height. See CLUTCH START SWITCH ADJUSTMENT  . Slowly screw switch in until ohmmeter indicates continuity exists. Hold switch at this position and tighten lock nut. Connect clutch start switch electrical connector.
CLUTCH START SWITCH ADJUSTMENT

Application Height From Floor In. (mm)
Metro 0.6-1.2 (15-30)
Prizm & Storm (1) .079-.240 (2.0-6.1)
(1) Clearance is measured between clutch start switch and clutch pedal arm.
scientia non olet · About LEMON Manuals