Installation (Front Door)
NOTE:
Before installing window into door, check to see that bottom channels are securely attached to window. If a channel is loose, note location of channel on the window and then remove channel from window. Clean all remaining adhesive from channel. Apply a bead of Automix Channel Bonding and Sidelite Adhesive, 3M P/N 08641. or equivalent, to channel and install the channel onto window. Refer to adhesive manufacturer's instruction for cure time.
- Install window to door; secure to regulator with two bolts.
- Position water deflector into place.
- Install front door trim. See DOOR TRIM .