LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1993 >> Tracker Base, 4WD, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Neutral Safety Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Neutral Safety Switch

  1. Disconnect negative battery cable. Ensure gearshift lever and transmission shift selector lever are in NEUTRAL position. Loosen neutral safety switch retaining bolt. Disconnect neutral safety switch 2 wire connector. See Fig 1 .
  2. Connect a DVOM to neutral safety switch connector terminals. Rotate neutral safety switch as far clockwise (downward) as possible.
  3. Slowly rotate neutral safety switch counterclockwise (upward) until a click is heard and continuity is obtained on DVOM. Tighten switch retaining bolt to 15 ft. lbs. (20 N.m). Connect neutral safety switch connector and negative battery cable.
Fig 1: Adjusting Neutral Safety Switch
G93C82745Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals