October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ground Circuit Checks
- Using an ohmmeter, check ground circuits to ECM for continuity to ground. See appropriate wiring diagram in WIRING DIAGRAMS
article in this section to determine ECM ground terminals. Resistance to ground should be zero ohms. If reading is other than zero ohms, repair open circuit to ground.
- Using a DVOM, touch negative voltmeter lead to a good ground. Touch positive voltmeter lead to each ground terminal. With vehicle running, voltmeter should indicate less than one volt. If voltmeter reading is greater than one volt, check for open, corrosion or loose connection on ground lead.