LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1994 >> Prizm Base, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Bench Testing >> Starter Component Inspection >> Commutator
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Starter Component Inspection: Commutator

  1. Using "V" blocks and dial indicator, check commutator runout (out-of-round). See STARTER SPECIFICATIONS  table. Turn commutator/armature on lathe until runout (out-of-round) is within specification.
  2. Check commutator diameter. Commutator should not be less than specification. See STARTER SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals