LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1994 >> Tracker Base, 1.6 6, RWD >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Ignition Switch Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch Test

  1. Using test light, backprobe White/Green wire terminal of ignition switch 7-terminal connector. Connector is located behind lower instrument panel, near steering column. Test light should glow.
  2. If test light does not glow, check fusible link "B". Fusible link box is located on right inner fender. Check for open in White/Green wiring circuit to ignition switch. See WIRING DIAGRAMS  .
  3. Turn ignition switch to START position. Using a test light, backprobe Black/Yellow wire terminal (at ignition switch 7-terminal connector) to starter circuit. Test light should glow. If test light does not glow, replace ignition switch.
scientia non olet · About LEMON Manuals