EGR Temperature Sensor: Service and Repair

EXHAUST GAS RECIRCULATION TEMPERATURE SENSOR REPLACEMENT

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Exhaust Gas Recirculation Temperature (EGRT) sensor electrical connector.
3. EGRT sensor from EGR valve.

INSTALL OR CONNECT
1 EGRT sensor to EGR valve. Tighten EGRT sensor to 10-20 Nm (7.5-14.0 lb ft).
2. EGRT sensor electrical connector.
3. Negative (-) battery cable. Tighten Negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb ft).