LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1996 >> Tracker Base, 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Bench Testing >> Rotor Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rotor Test

  1. Using an ohmmeter, measure resistance between rotor and slip rings. Perform STEP 1. See Fig 1 . If resistance is less than 5 ohms, replace rotor.
  2. Using an ohmmeter, measure resistance between slip rings. Perform STEP 2. See Fig 1 . If resistance is greater than 3.5 ohms, replace rotor.
Fig 1: Testing Generator Rotor
G91D02005Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals