LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1997 >> Metro Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Bench Testing >> Rotor Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rotor Test

  1. Using an ohmmeter, measure resistance between rotor and slip rings. Perform STEP 1. See Fig 1. If resistance is less than 5 ohms, replace rotor.
  2. Measure resistance between slip rings. Perform STEP 2. See Fig 1. If resistance is greater than 3.5 ohms, replace rotor.
Fig 1: Testing Generator Rotor (Typical)
G91H02012Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals