October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
1300 Models
- Jack up and support front of vehicle. Push the voltmeter probe into Yellow/Black wire terminal at control box number 1 connector. Connect the negative probe to ground. Start engine.
- Select second gear (man. trans.) or position 2 (auto. trans.) and accelerate slowly, while observing voltmeter. Voltage should be battery voltage below 6 MPH and no voltage above 12 MPH. If so, sensor is okay. If not, install a new sensor and retest.