LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1987 >> Civic CRX Si >> Repair and Diagnosis >> Engine Performance >> System >> Electronic Control System >> Trouble Shooting >> Fast Idle Control Solenoid Valve
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fast Idle Control Solenoid Valve

  1. Plug system checker harness between ECU and connector. Start engine. Connect voltmeter positive probe to terminal B4 (Blue/Black wire) and negative probe to terminal A18 (Black/Red wire). Voltage should be .5-1.5 volts.
  2. If there is no voltage, check for open circuit in Black/Yellow wire between No. 11 fuse (No. 4 fuse on CRX Si) and fast idle control solenoid valve, open circuit in Blue/Black wire (Green/Yellow wire on CRX Si) between fast idle control solenoid valve and ECU, or an open circuit in fast idle control solenoid valve. If 9 volts or more is available, replace ECU.
scientia non olet · About LEMON Manuals