Set/Resume Switch: Prelude
- Remove steering wheel. Check for continuity between terminals "A" and "C" with set switch in "ON" position. There should be continuity. Check for continuity between terminals "A" and "B" with resume switch in "ON" position. There should be continuity.
- Remove steering column cover. Disconnect 2-pin and 1-pin connectors. There should be continuity between terminal "A" and pin "A", terminal "B" and pin "B, and terminal "C" and pin "C", as you turn the slip ring. See Fig 1
& Fig 2
.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Courtesy of AMERICAN HONDA MOTOR CO., INC.