Alignment

NOTE: Alignment should be performed with all fluid levels full and optional equipment installed in proper locations. If an alignment range is given, desired setting would be at the mid-point.

CAMBER
Front -0°15' ± 1°
Rear -0°30' ±1°

CASTER 1°10' ± 1°

TOE
Front, Total mm (in) 0 ± 2 (0 ± 0.08)
Rear, Toe-In mm (in) 1 - 4 (0.04 - 0.16)

WHEEL TURNING ANGLE
Inward Wheel 40°00' ± 2°
Outward Wheel 33°0'