Passenger's Window Switch Test
Remove power window master switch. See procedures under MASTER POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Fig 1 . See PASSENGER'S POWER WINDOW SWITCH TEST table.
PASSENGER'S POWER WINDOW SWITCH TEST
| Position | Pin Continuity | |
|---|---|---|
| Coupe | ||
| Off | "B" & "E"; "C" & "D" | |
| Up | "A" & "D"; "B" & "E" | |
| Down | "A" & "B"; "C" & "D" | |
| Sedan/Wagon | ||
| Off | "D" & "E"; "B" & "C" | |
| Up | "A" & "D"; "B" & "C" | |
| Down | "A" & "C"; "D" & "E" | |