October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ignition Coil Resistance
- Remove primary and secondary leads from ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "C" (Accord) of ignition coil. See Fig 1
. Resistance should be as specified. See IGNITION COIL RESISTANCE
.
- Check secondary resistance between terminal "A" and secondary output terminal (coil tower). See IGNITION COIL RESISTANCE
. Check for continuity between "A" and "B" terminals (Odyssey and Prelude) or terminals "A" and "C" (Accord). Continuity should exist. If readings are not within specification, replace coil.
Courtesy of AMERICAN HONDA MOTOR CO., INC. IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)
| Application |
Primary |
Secondary |
| Accord |
| F22B1 Engine |
.4 -.6 |
22,000-34,000 |
| F22B2 Engine |
.6 -.8 |
14,000-22,000 |
| Civic & Civic Del Sol |
.6 -.8 |
12,800-19,200 |
| Odyssey & Prelude |
.4 -.6 |
22,000-34,000 |