Code 32 - EGR System Malfunction
NOTE:
See appropriate WIRING DIAGRAM in WIRING DIAGRAMS section for terminal and connector identification.
NOTE:
Test numbers refer to numbers on diagnostic chart.
- Specified reappearance pattern:
- Run engine at idle and normal operating temperature.
- Keep vehicle at idle for more than 10 seconds at stop.
- Drive vehicle at 10 MPH. Accelerate to more than 30 MPH.
- After 10-30 seconds, decelerate to complete stop.
- Repeat pattern several times.
- This step checks EGR operation by re-applying signal vacuum.