LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1995 >> Prelude VTEC >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls - Basic Testing - 2.3L) >> Ignition Checks >> Electronic Ignition System >> Ignitor Power Source
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignitor Power Source

WARNING: This page is about a different variant/trim than selected.

Turn ignition off. Disconnect harness connector at distributor. Turn ignition on. Using voltmeter, check for battery voltage between ground and Black/Yellow wire of harness. If voltage is not present, check for open in Black/Yellow or Yellow wire between ignition coil and harness connector. If wire is okay, check ignition coil resistance (for internal short to ground).