Section 12 (Engine Controls - System/Component Tests - 2.3L): Introduction

WARNING: This page is about a different car, the 1995 Honda Prelude. However, it is still accessible from the selected car via links, so may be relevant.

Before testing separate components or systems, perform procedures in BASIC TESTING - 2.3L article. Since many computer-controlled and monitored components set trouble codes if they malfunction, also perform procedures in TESTS W/CODES - 2.3L article.

NOTE: Perform all voltage tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure. Testing individual components does not isolate shorts or opens. Use ohmmeter to isolate wiring harness shorts or opens.