Passenger's Window Switch Test
Remove power window master switch. See MASTER POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Fig 1 . See PASSENGER'S POWER WINDOW SWITCH TEST table.
PASSENGER'S POWER WINDOW SWITCH TEST
| Position | Pin Continuity | |
|---|---|---|
| Coupe | ||
| Off | B & E; C & D | |
| Up | A & D; B & E | |
| Down | A & B; C & D | |
| Sedan/Wagon | ||
| Off | D & E; B & C | |
| Up | A & D; B & C | |
| Down | A & C; D & E | |