Tripped Sensor Indication
System will indicate which sensor caused alarm to be triggered by security indicator LED. To display tripped sensor flash code, press disarm/valet switch 3 times within 5 seconds after system has been disarmed. Security indicator LED will blink according to preset codes, indicating which sensor caused the system to trigger. See SECURITY INDICATOR LED SENSOR CODES table.
SECURITY INDICATOR LED SENSOR CODES
| Sensors | Number Of Flashes | ||
|---|---|---|---|
| Door | 1 Blink, Pause, Repeat | ||
| Trunk | 2 Blinks, Pause, Repeat | ||
| System Switches | 3 Blinks, Pause, Repeat | ||
| Glass Breakage | 4 Blinks, Pause, Repeat | ||
| Hood (1) | 5 Blinks, Pause, Repeat | ||
|
|||