Right Mirror Inoperative
- Remove power mirror switch. DO NOT disconnect switch from harness. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Turn ignition on. Using jumper wires, connect terminal No. 2 (Black/Yellow wire) to terminal No. 3 (Yellow/Red wire), and either terminal No. 8 (Yellow/Black wire) or terminal No. 9 (Green/White wire) to ground.
- If mirror does not tilt down (or swing left), check for open in Green/White or Yellow/Black wire between mirror switch and mirror. If wiring is okay, check right mirror motor. See POWER MIRROR MOTOR TEST. If mirror operates correctly, check mirror switch. See POWER MIRROR SWITCH TEST.