Master Switch Test
Remove power window master switch. See MASTER POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Fig 1 . See POWER WINDOW MASTER SWITCH TEST table.
POWER WINDOW MASTER SWITCH TEST
| Position | Continuity | |||
|---|---|---|---|---|
| Main Switch | ||||
| On | F & J | |||
| OFF | (1) | |||
| Driver's Switch | ||||
| Off | (1) | |||
| Up | I & J | |||
| Down | C & J | |||
| Down (AUTO) | C, B & J | |||
| Passenger's Switch | ||||
| Up | L & F | |||
| Down | K & F | |||
| Rear Window Switch | ||||
| Up | N & F | |||
| Down | M & F | |||
|
||||