DTC P1359 - CKP/TDC/CYP Sensor Circuit Problem
- Perform PCM reset procedure. See Self Diagnostic section. Start engine. If engine will not start, crank engine continuously for at least 15 seconds. If DTC P1359 is indicated, go to next step. If DTC P1359 is not indicated, problem is intermittent. System is okay at this time. Check for poor connections or loose wires between distributor (CKP/TDC/CYP sensor) and PCM. See WIRING DIAGRAMS article. Repair as necessary.
- Check for poor connections or loose wires between distributor (CKP/TDC/CYP sensor) connector and PCM. See WIRING DIAGRAMS article. Repair as necessary. If wires and connections are okay, substitute a known-good PCM and recheck. If symptom or indication goes away, replace original PCM.