Passenger's Window Switch Test
Remove passenger's power window switch. See PASSENGER POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. See Fig 1 . If continuity is not as specified, replace switch. See PASSENGER'S POWER WINDOW SWITCH TEST table. See WIRING DIAGRAMS .
PASSENGER'S POWER WINDOW SWITCH TEST
| Switch Position | Pin Continuity | |
|---|---|---|
| Accord | ||
| Off | 1, 2, 4 & 6; 2 & 5; 2 & 6 | |
| Up | 1, 2, 3 & 6 | |
| Down | 2, 3, 4 & 5; 2 & 6 | |
| Prelude | ||
| Off | 2 & 3; 4 & 5 | |
| Up | 1 & 4; 2 & 3 | |
| Down | 1 & 3; 4 & 5 | |