LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1998 >> Prelude Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Emission Systems & Sub-Systems >> On-Board Refueling Vapor Recovery Vent Shut Valve >> Valve Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Valve Test

  1. Ensure fuel tank is less than half full. Remove fuel fill cap to relieve pressure. Remove left rear inner fender. Disconnect the ORVR signal hose. Disconnect and plug vacuum hoses (A & C) from the EVAP control canister. Connect a vacuum pump to hose "D". See Figure . Pump vacuum pump 80 times. If vacuum does not hold, go to step 2).
  2. If vacuum holds, connect a second vacuum pump to the ORVR signal hose (E). See Figure . Pump vacuum pump 1 time only. If vacuum is released on first vacuum pump, ORVR is okay. If vacuum is not released, replace the ORVR vent shut valve and retest.
scientia non olet · About LEMON Manuals