LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1999 >> Prelude Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Fuel System >> Fuel Pressure >> Pressure Testing (Civic, CV-R & Prelude)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pressure Testing (Civic, CV-R & Prelude)

  1. Disconnect negative battery terminal. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . On Civic, remove 12-mm banjo bolt. On Prelude, remove the sealing nut on fuel rail. On all models, connect Fuel Pressure Gauge (07406-0040001) and Fuel Pressure Gauge Adapter (90201-P0A-003). Reconnect negative battery terminal. Disconnect vacuum hose from fuel pressure regulator and pinch return line closed. Start engine, and read fuel pressure. If engine starts, go to next step. If engine will not start, turn ignition on, wait for 2 seconds, turn ignition off, then on again and read fuel pressure.
  2. With engine idling, reconnect vacuum hose to fuel pressure regulator and release fuel return line. Read fuel pressure. Both gauge readings should be within specification. See REGULATED FUEL PRESSURE  table. If fuel pressure readings are within specification, go to next step. If fuel pressure is higher than specified, check for pinched or clogged fuel return hose or defective fuel pressure regulator. If fuel pressure is lower than specified, check for clogged fuel filter, defective fuel pressure regulator or fuel line leakage.
  3. Relieve fuel pressure and remove gauge. On Civic, tighten 12-mm banjo bolt to 25 ft. lbs. (33 N.m). On Prelude, tighten 12-mm sealing nut to 16 ft. lbs. (22 N.m). Start engine and check for leaks.
REGULATED FUEL PRESSURE

Application At Idle psi (kg/cm2 )
Accord
2.3L
Vacuum Hose Disconnected & Pinched 47-54 (3.3-3.8)
Vacuum Hose Connected 38-46 (2.7-3.2)
3.0L
Vacuum Hose Disconnected & Pinched 41-48 (2.9-3.4)
Vacuum Hose Connected 32-40 (2.3-2.8)
Civic
B16A2 Engine
Vacuum Hose Disconnected & Pinched 40-47 (2.8-3.3)
Vacuum Hose Connected 30-37 (2.1-2.6)
Except B16A2 Engine
Vacuum Hose Disconnected & Pinched 38-46 (2.7-3.2)
Vacuum Hose Connected 28-36 (2.0-2.5)
CR-V
Vacuum Hose Disconnected & Pinched 40-47 (2.8-3.3)
Vacuum Hose Connected 31-38 (2.2-2.7)
Odyssey & SLX
Vacuum Hose Disconnected & Pinched 41-48 (2.9-3.4)
Vacuum Hose Connected 32-40 (2.3-2.8)
Prelude
Vacuum Hose Disconnected & Pinched 40-47 (2.8-3.3)
Vacuum Hose Connected 30-37 (2.1-2.6)