Anti-Theft & Keyless Entry Systems: Programming: Transmitter
NOTE:
Up to 3 transmitter codes can be stored in power door lock control unit memory. If a fourth code is entered, the first one stored will be erased. It is important to maintain time limits between steps, otherwise process will need to be repeated.
- Turn ignition switch to ON position. Within 1-4 seconds, aim transmitter at vehicle and push LOCK or UNLOCK button. Within 1-4 seconds, turn ignition switch to OFF position.
- Within 1-4 seconds, turn ignition switch to ON position. Within 1-4 seconds, aim transmitter at vehicle and push LOCK or UNLOCK button. Within 1-4 seconds, turn ignition switch to OFF position.
- Within 1-4 seconds, turn ignition switch to ON position. Within 1-4 seconds, aim transmitter at vehicle and push LOCK or UNLOCK button. Within 1-4 seconds, turn ignition switch to OFF position.
- Within 4 seconds, turn ignition switch to ON position. Within 1-4 seconds, aim transmitter at vehicle and push LOCK or UNLOCK button. Confirm you can hear sound of door lock actuators.
- Within 8 seconds, aim transmitters to be programmed (up to 3) at vehicle and press LOCK or UNLOCK buttons. Confirm door lock actuator operation after each transmitter code is stored. Turn ignition switch to OFF position. Remove key and confirm proper operation of transmitters.