Cruise Control Actuator/Cable Replacement

Loosen the locknut (A), then disconnect the actuator cable (B) from the throttle linkage.

Fig 1: Loosening The Locknut
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 4P connector (A) from the cruise control actuator.

Fig 2: Disconnecting The 4P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the three mounting bolts (B), and remove the cruise control actuator assembly (C).
Install actuator/cable in the reverse order of removal, and adjust the free play at the throttle linkage (see Cruise Control Actuator Cable Adjustment ) after connecting the actuator cable.