Anti-Theft & Keyless Entry System: Programming: Transmitter
NOTE:
Up to 3 transmitter codes can be stored in keyless receiver unit memory. If a fourth code is entered, the first one stored will be erased. It is important to maintain time limits between steps, otherwise process will need to be repeated.
- Turn ignition switch to ON position. Within 1-4 seconds, aim transmitter at vehicle and push LOCK or UNLOCK button. Within 1-4 seconds, turn ignition switch to OFF position.
- Within 1-4 seconds, turn ignition switch to ON position. Within 1-4 seconds, aim transmitter at vehicle and push LOCK or UNLOCK button. Within 1-4 seconds, turn ignition switch to OFF position.
- Within 1-4 seconds, turn ignition switch to ON position. Within 1-4 seconds, aim transmitter at vehicle and push LOCK or UNLOCK button. Within 1-4 seconds, turn ignition switch to OFF position.
- Within 4 seconds, turn ignition switch to ON position. Within 1-4 seconds, aim transmitter at vehicle and push LOCK or UNLOCK button. Ensure sound of door lock actuator is heard. Within 1-4 seconds push LOCK or UNLOCK button again.
- Within 10 seconds, aim transmitters to be programmed (up to 3) at vehicle and press LOCK or UNLOCK buttons. Ensure sound of door lock actuator operation is heard after each transmitter code is stored. Turn ignition switch to OFF position. Remove key and confirm proper operation of transmitters.