Tripped Sensor Indication
System will indicate which sensor caused alarm to be triggered by security indicator LED. To display tripped sensor flash code, ensure key is removed from ignition and system is disarmed. Press disarm/valet switch 3 times in 5 seconds. Security indicator LED will flash, pause, then repeat, indicating which sensor caused the system to trigger. See SECURITY INDICATOR LED SENSOR CODES table.
SECURITY INDICATOR LED SENSOR CODES
| Sensors | Number Of Flashes |
|---|---|
| Door | 1 |
| Trunk | 2 |
| System Switches | 3 |
| Glass Breakage | 4 |
| Hood (If Equipped) | 5 |