LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2000 >> Prelude Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Starting System) >> Bench Testing >> Solenoid Tests >> Pull-In Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pull-In Test

WARNING: This page is about a different car, the 2001 Honda Prelude, 2001 Honda Odyssey, 2001 Honda CR-V, and 2001 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check continuity between starter case (ground) and starter solenoid terminal "S". If continuity exists, go to next step. If continuity does not exist, replace starter solenoid.
  2. Check continuity between starter solenoid terminals "S" and "M". See Figure-Figure . If continuity exists, pull-in coil is okay. If continuity does not exist, replace starter solenoid.
scientia non olet · About LEMON Manuals