Scan Tool Clear Command
WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
If you are using a generic scan tool to clear commands, be aware that there is only one setting for clearing the ECM, and it clears all commands at the same time (CKP pattern learn, idle learn, readiness codes, freeze data, on-board snapshot, and DTCs). After you clear all commands, you then need to do these procedures, in this order: ECM idle learn procedure (see ECM IDLE LEARN PROCEDURE ); CKP pattern learn procedure; Test-drive to set readiness codes to complete (see HOW TO SET READINESS CODES ).