Throttle Position Learning Check

WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

Connect the HDS to the data link connector (DLC) (A) located behind under the driver's side of the front console.

Fig 1: Identifying Data Link Connector (DLC) Location
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Turn the ignition switch ON (II).
Make sure the HDS communicates with the vehicle and the ECM. If it doesn't, go to DLC CIRCUIT TROUBLESHOOTING .
Select the INSPECTION MENU with the HDS.
Do the TP LEARNING CHECK in the ETCS TEST. If needed, clean the throttle body (see THROTTLE BODY CLEANING ).