Dust and Pollen Filter Replacement

WARNING: This page is about a different car, the 2009 Honda S2000 and 2008 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

Open the hood.
Remove the clips (A) and the hood seal (B). Lift the right side of the cowl cover (C) up, and remove the dust and pollen filter (D) as shown. Be careful not to damage the hood seal when removing the clips.

Fig 1: Identifying Clips, Hood Seal And Cowl Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the filter (A) from the housing (B). Replace the filter.

Fig 2: Identifying Filter And Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the filter in the reverse order of removal.