LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2001 >> CR-V SE, Automatic, MDMA >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls Self-Diagnostics >> Diagnostic Tests >> DTC P1359: CKP/TDC/CYP Sensor Circuit Problem
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P1359: CKP/TDC/CYP Sensor Circuit Problem

  1. Perform PCM reset procedure. See POWERTRAIN CONTROL MODULE RESET PROCEDURE . Start engine. If engine will not start, crank engine continuously for at least 15 seconds. If DTC P1359 is indicated, go to next step. If DTC P1359 is not indicated, problem is intermittent. System is okay at this time. Check for poor connections or loose wires at distributor (CKP/TDC/CYP sensor) and PCM connectors. See WIRING DIAGRAMS article. Repair as necessary.
  2. Check for poor connections or loose wires between distributor (CKP/TDC/CYP sensor) and PCM connectors. See WIRING DIAGRAMS article. Repair as necessary. If wires and connections are okay, substitute a known-good PCM and retest. If symptom or indication goes away, replace original PCM. Perform final procedure. See FINAL PROCEDURE .