2005-2006 Models
NOTE:
Record all freeze data and review General Troubleshooting Information (see
GENERAL TROUBLESHOOTING INFORMATION ) before you troubleshoot.
MODELS DESCRIPTION
| DTC (1) | D Indicator | MIL | Detection Item | Page | ||||
|---|---|---|---|---|---|---|---|---|
| P0501 (4-5)(2) | Blinks | ON | Vehicle speed sensor circuit (range/performance) | (see DTC P0501: RANGE/PERFORMANCE PROBLEM IN VEHICLE SPEED SENSOR CIRCUIT ) | ||||
| P0502 (4-3)(2) | Blinks | ON | Vehicle speed sensor circuit (no signal input) | (see DTC P0502: PROBLEM IN VEHICLE SPEED SENSOR CIRCUIT (NO SIGNAL INPUT) ) | ||||
| P0603 (0-3)(2) | Blinks | ON | Transmission control module (TCM) | (see DTC P0603: PROBLEM IN TCM ) | ||||
| P0705 (5-2)(2) | Blinks | ON | Transmission range switch circuit (short to ground) (multiple shift-position input) | (see DTC P0705: SHORT IN TRANSMISSION RANGE SWITCH CIRCUIT (MULTIPLE SHIFT-POSITION INPUT) ) | ||||
| P0706 (6-2)(2) | Not blinks | ON | Transmission range switch circuit (open) | (see DTC P0706: OPEN IN TRANSMISSION RANGE SWITCH CIRCUIT ) | ||||
| P0716 (34-5)(2) | Blinks | ON | CVT input shaft (drive pulley) speed sensor circuit (range/performance) | (see DTC P0716: RANGE/PERFORMANCE PROBLEM IN CVT INPUT SHAFT (DRIVE PULLEY) SPEED SENSOR CIRCUIT ) | ||||
| P0717 (34-3)(2) | Blinks | ON | CVT input shaft (drive pulley) speed sensor circuit (no signal input) | (see DTC P0717: PROBLEM IN CVT INPUT SHAFT (DRIVE PULLEY) SPEED SENSOR CIRCUIT (NO SIGNAL INPUT) ) | ||||
| P0721 (35-5)(2) | Blinks | ON | CVT output shaft (driven pulley) speed sensor circuit (range/performance) | (see DTC P0721: RANGE/PERFORMANCE PROBLEM IN CVT OUTPUT SHAFT (DRIVEN PULLEY) SPEED SENSOR CIRCUIT ) | ||||
| P0722 (35-3)(2) | Blinks | ON | CVT output shaft (driven pulley) speed sensor circuit (no signal input) | (see DTC P0722: PROBLEM IN CVT OUTPUT SHAFT (DRIVEN PULLEY) SPEED SENSOR CIRCUIT (NO SIGNAL INPUT) ) | ||||
| P0726 (11-5)(2) | Blinks | ON | Engine RPM signal input circuit (range/ performance) | (see DTC P0726: RANGE/PERFORMANCE PROBLEM IN ENGINE RPM SIGNAL INPUT CIRCUIT ) | ||||
| P0727 (11-3)(2) | Blinks | ON | Engine RPM signal input circuit (no signal input) | (see DTC P0727: PROBLEM IN ENGINE RPM SIGNAL INPUT CIRCUIT (NO SIGNAL INPUT) ) | ||||
|
NOTE:
|
||||||||
NOTE:
Record all freeze data and review General Troubleshooting Information (see
GENERAL TROUBLESHOOTING INFORMATION ) before you troubleshoot.
MODELS DESCRIPTION
| DTC (1) | D Indicator | MIL | Detection Item | Page | ||||
|---|---|---|---|---|---|---|---|---|
| P0780 (42-2) | Blinks | ON | Shift control system | (see DTC P0780: PROBLEM IN SHIFT CONTROL SYSTEM ) | ||||
| P0801 (33-2)(2) | Blinks | OFF | Inhibitor solenoid circuit | (see DTC P0801: PROBLEM IN INHIBITOR SOLENOID CIRCUIT ) | ||||
| P0811 (43-2) | Blinks | ON | Start clutch control system | (see DTC P0811: PROBLEM IN START CLUTCH CONTROL SYSTEM ) | ||||
| P0962 (38-3)(2) | Blinks | ON | CVT drive pulley pressure control valve circuit low | (see DTC P0962: CVT DRIVE PULLEY PRESSURE CONTROL VALVE CIRCUIT LOW VOLTAGE ) | ||||
| P0963 (38-4)(2) | Blinks | ON | CVT drive pulley pressure control valve circuit high | (see DTC P0963: CVT DRIVE PULLEY PRESSURE CONTROL VALVE CIRCUIT HIGH VOLTAGE ) | ||||
| P0966 (39-3)(2) | Blinks | ON | CVT driven pulley pressure control valve circuit low | (see DTC P0966: CVT DRIVEN PULLEY PRESSURE CONTROL VALVE CIRCUIT LOW VOLTAGE ) | ||||
| P0967 (39-4)(2) | Blinks | ON | CVT driven pulley pressure control valve circuit high | (see DTC P0967: CVT DRIVEN PULLEY PRESSURE CONTROL VALVE CIRCUIT HIGH VOLTAGE ) | ||||
| P0970 (32-3)(2) | Blinks | ON | CVT start clutch pressure control valve circuit low | (see DTC P0970: CVT START CLUTCH PRESSURE CONTROL VALVE CIRCUIT LOW VOLTAGE ) | ||||
| P0971 (32-4)(2) | Blinks | ON | CVT start clutch pressure control valve circuit high | (see DTC P0971: CVT START CLUTCH PRESSURE CONTROL VALVE CIRCUIT HIGH VOLTAGE ) | ||||
| P1655 (37-1)(2) | Blinks | OFF | Transmisison control module (TCM)-to-engine control module (ECM) communication circuit | (see DTC P1655: PROBLEM IN TCM-TO-ECM COMMUNICATION LINES ) | ||||
| P1782 (3-11)(2) | Blinks | ON | Throttle position (TP) sensor circuit low | (see DTC P1782: TP SENSOR CIRCUIT LOW VOLTAGE ) | ||||
| P1783 (3-12)(2) | Blinks | ON | Throttle position (TP) sensor circuit high | (see DTC P1783: TP SENSOR CIRCUIT HIGH VOLTAGE ) | ||||
| P1784 (12-11)(2) | Blinks | ON | Manifold absolute pressure (MAP) sensor circuit low | (see DTC P1784: MAP SENSOR CIRCUIT LOW VOLTAGE ) | ||||
| P1785 (12-12)(2) | Blinks | ON | Manifold absolute pressure (MAP) sensor circuit high | (see DTC P1785: MAP SENSOR CIRCUIT HIGH VOLTAGE ) | ||||
| P1792 (10-3, 10-4)(2) | Blinks | OFF | Engine coolant temperature (ECT) sensor circuit | (see DTC P1792: PROBLEM IN ENGINE COOLANT TEMPERATURE SENSOR CIRCUIT ) | ||||
| P1799 (92-3, 92-4)(2) | Blinks | OFF | Intake air temperature (IAT) sensor circuit | (see DTC P1799: PROBLEM IN INTAKE AIR TEMPERATURE SENSOR CIRCUIT ) | ||||
| P1850 (90-1)(2) | Blinks | OFF | Creep aid system solenoid valve A | (see DTC P1850: PROBLEM IN CREEP AID SYSTEM SOLENOID VALVE A CIRCUIT ) | ||||
| P1851 (91-1)(2) | Blinks | OFF | Creep aid system solenoid valve B | (see DTC PI851: PROBLEM IN CREEP AID SYSTEM SOLENOID VALVE B CIRCUIT ) | ||||
| P2159 (36-9)(2) | Blinks | ON | CVT speed sensor circuit (range/performance) | (see DTC P2159: RANGE/PERFORMANCE PROBLEM IN CVT SPEED SENSOR CIRCUIT ) | ||||
| P2160 (36-7)(2) | Blinks | ON | CVT speed sensor circuit (no signal input) | (see DTC P2160: PROBLEM IN CVT SPEED SENSOR CIRCUIT (NO SIGNAL INPUT) ) | ||||
|
NOTE:
|
||||||||