Cruise Control Unit Input Test
- Turn ignition off. Remove driver's side instrument panel lower cover. Disconnect cruise control unit 14-pin connector. See COMPONENT LOCATIONS
. Inspect connectors for loose, damaged or corroded terminals. If problem exists, repair connector(s) and retest cruise control operation. If problem does not exist, go to next step.
- Using a DVOM, perform cruise control unit input tests. See Fig 1
. If any input test indicates a problem, locate and repair circuit as necessary. Road test vehicle and retest cruise control operation. If all input tests are okay, replace faulty cruise control unit.
Courtesy of AMERICAN HONDA MOTOR CO., INC.